AL-3011 Resistor Emulation Board for SLSC

NI part.no 787890-01 (AL-3011, 16CH, 8 MOHM RESISTOR EMULATION MODULE FOR SLSC)

The AL-3011 is a 16-channel resistor emulation board for applications requiring simulation of resistive sensors. The AL-3011 board is designed for the National Instruments (NI) Switch Load Signal Conditioning (SLSC) system, to be used in Hardware-In-the-Loop (HIL) simulators.

The resistance (RES) can be set to 10Ω -8MΩ for each channel

Fault insertion (FIU) is available on each channel providing short to FI+ or to FI –

The board interfaces NI PXI and/or Compact-RIO instrumentation devices for the purposes of developing, verifying, and validating electronic control unit software and hardware. By using software, such as Aliaro Configurator, the pins can easily be configured and deployed in NI VeriStand

More information

For more information regarding National Instruments SLSC,
  • 60V, 110mA per channel
  • 16 independent and isolated channels
  • 16 programmable channels for resistor emulation
  • 50 seconds programming resistance sequence
  • 2 Expansion Slots for Add-on boards
  • Two common buses per bank with switches to each channel
  • Brake up switch for each channel
  • Pull up and pull down on each channel
  • Wide resistance range
  • LabVIEW driver included
  • Custom Device Driver for Veristand included
  • Compatible with NI VeriStand
  • Hardware in the Loop (HIL) testing
  • Fault insertion i.e. validation of faulty wiring or corrupt sensors
  • Emulation of sensors with multi functionality
  • Support of PT100 and PT1000
  • Hardware in the Loop (HIL) testing
  • Fault insertion i.e. validation of faulty wiring or corrupt sensors
  • Emulation of sensors with multi functionality
  • Support of PT100 and PT1000
+ Description

The board interfaces NI PXI and/or Compact-RIO instrumentation devices for the purposes of developing, verifying, and validating electronic control unit software and hardware. By using software, such as Aliaro Configurator, the pins can easily be configured and deployed in NI VeriStand

More information

For more information regarding National Instruments SLSC,
+ Specifications
  • 60V, 110mA per channel
  • 16 independent and isolated channels
  • 16 programmable channels for resistor emulation
  • 50 seconds programming resistance sequence
  • 2 Expansion Slots for Add-on boards
  • Two common buses per bank with switches to each channel
  • Brake up switch for each channel
  • Pull up and pull down on each channel
  • Wide resistance range
  • LabVIEW driver included
  • Custom Device Driver for Veristand included
  • Compatible with NI VeriStand
+ Applications
  • Hardware in the Loop (HIL) testing
  • Fault insertion i.e. validation of faulty wiring or corrupt sensors
  • Emulation of sensors with multi functionality
  • Support of PT100 and PT1000
+ Applications
  • Hardware in the Loop (HIL) testing
  • Fault insertion i.e. validation of faulty wiring or corrupt sensors
  • Emulation of sensors with multi functionality
  • Support of PT100 and PT1000
+ Tab